Fast, licensed renter fire damage cleanup in SOLANA BEACH

Tenant Fire Damage Cleanup SOLANA BEACH CA

Tenant Fire Damage Cleanup SOLANA BEACH CA is the service renters and landlords call when a kitchen flare-up, electrical fire, or smoke event leaves a unit uninhabitable. We handle soot, smoke odor, and water damage from firefighting so you can get back in or get the unit turned around. Our team works directly with renters, property managers, and owners across San Diego County, including ZIP codes 92075 and 92014.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Tenant Fire Damage Cleanup you can count on
Careful work. Honest options.
About this service

What Tenant Fire Damage Cleanup SOLANA BEACH CA Involves

Tenant Fire Damage Cleanup SOLANA BEACH CA is the process of stabilizing a rental unit after a fire, then removing soot, smoke residue, and water left behind by firefighting. It is not the same as a full rebuild. We start with a room-by-room assessment using a moisture meter and thermal imaging camera to find hidden heat damage and water migration inside walls. From there we contain the affected area, run HEPA air scrubbers, and begin dry soot removal with chemical sponges before any wet cleaning touches charred framing or cracked drywall.

Renters in SOLANA BEACH face a specific problem: the lease does not pause because the unit is smoky. If you are searching for tenant fire damage cleanup near me in SOLANA BEACH CA, you need a crew that can document damage for the landlord and the renters insurance claim at the same time. We photograph every affected surface, log soot residue levels, and provide a written scope that separates tenant contents from structural damage. That record matters when the property manager and the insurance adjuster compare notes.

  • ✓ Documented for Insurance
  • ✓ Odor Removed, Not Masked
  • ✓ Water Damage Handled Same Visit
  • ✓ Renter-Friendly Scheduling
What's included

What Tenant Fire Damage Cleanup Includes

Our standard tenant fire cleanup scope covers assessment, containment, soot removal, water extraction, drying, and odor treatment. Contents cleaning and structural repair are separate scopes, and we tell you up front which is which so there are no surprises on the invoice.

✓

Damage Assessment and Documentation

Thermal imaging, moisture mapping, and photo documentation of every affected surface. You get a written scope that separates tenant contents from structural damage, which is what both insurance sides need.

✓

Containment and Air Scrubbing

Plastic sheeting, negative air pressure, and HEPA air scrubbers keep soot and smoke particles from spreading to unaffected rooms or neighboring units during the cleaning process.

✓

Soot and Residue Removal

Dry soot sponging, dry ice blasting on framing, and wet cleaning on walls and ceilings. We match the cleaner to the residue type so we do not smear protein smoke or oil-based soot deeper into the surface.

✓

Water Extraction and Structural Drying

Extraction of standing water followed by air movers and dehumidifiers. Daily moisture readings determine when drying is complete, usually 3 to 5 days depending on materials affected.

✓

Odor Neutralization

Thermal fogging, ozone, or hydroxyl treatment depending on occupancy and material sensitivity. We do not close out a job until the unit passes a smoke odor check.

How it works

How Our Tenant Fire Cleanup Process Works

01

Emergency Call and Assessment

You call, we ask what burned and how much water was used. A technician arrives, walks the unit with you, and uses a thermal imaging camera and moisture meter to map heat damage and water migration. This assessment usually takes 45 to 90 minutes and sets the scope for everything that follows.

02

Containment and Air Control

We seal doorways and HVAC vents with plastic sheeting and negative air pressure so soot and smoke particles do not spread to unaffected rooms. HEPA air scrubbers run continuously during demolition and cleaning. This step protects the rest of the building, which matters in attached units and apartment buildings.

03

Soot and Residue Removal

Dry soot comes off first with soot sponges and dry ice blasting on framing and masonry. Wet cleaning follows on walls, ceilings, and hard surfaces. We use the right cleaner for the residue type, because protein smoke from a kitchen fire and oil-based soot from an electrical fire behave differently on drywall and paint.

04

Water Extraction and Drying

Standing water is extracted, then air movers and dehumidifiers are placed to dry structural cavities. We check moisture readings daily and do not pull equipment until the readings match a dry standard. Typical drying runs 3 to 5 days.

05

Odor Treatment and Final Walkthrough

Thermal fogging, ozone, or hydroxyl treatment neutralizes smoke odor in the air and in porous materials. We finish with a walkthrough with you or the property manager, a written summary of work performed, and photo documentation for the insurance file.

Tools & methods

Tools and Methods We Use

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Thermal Imaging Camera

Finds hidden heat damage in walls and ceilings and maps water migration from firefighting before cleaning begins.

HEPA Air Scrubber

Filters smoke and soot particles out of the air during containment and cleaning, protecting unaffected rooms and neighboring units.

Thermal Fogger

Pushes deodorizing agent into cavities and porous materials where smoke odor settles and surface cleaning cannot reach.

Ozone and Hydroxyl Generators

Neutralizes smoke odor in the air and in soft goods. Hydroxyl units are used when the space cannot be fully vacated.

Dry Ice Blaster

Removes soot and char from framing and masonry without the abrasion or water damage of traditional blasting.

Dri-Eaz and Phoenix Dehumidifiers

Pulls moisture out of structural cavities after water extraction so mold growth after fire does not start.

Moisture Meter

Tracks drying progress daily and confirms when structural materials have reached a dry standard.

Real results

Before and after.

Kitchen Fire in a Town Center Apartment

Before

A grease fire left protein smoke residue on every wall and cabinet in a 750-square-foot unit. The smell was strong enough that the tenant could not sleep there, and the landlord wanted the unit turned around fast.

After

We cleaned the residue with the correct cleaner for protein smoke, ran a hydroxyl generator for 36 hours, and documented the scope for both insurance sides. The unit passed an odor check and was re-occupied in five days.

Electrical Fire with Water Damage in Lomas Santa Fe

Before

An electrical fire charred framing in a bedroom closet and the fire department used water to put it out. Moisture readings showed water had soaked into the wall cavity and flooring.

After

We extracted water, ran air movers and dehumidifiers for four days, removed char with dry ice blasting, and treated the bedroom and closet for smoke odor. Moisture readings returned to dry standard and the unit was ready for drywall repair.

Attic Fire Smoke Spread in a Coastal Bluff Rental

Before

A small attic fire sent smoke through the HVAC system into every room of a coastal bluff rental. Soot residue was light but present on ceilings and in the ductwork, and the owner was worried about replacing the system.

After

We sealed vents, ran HEPA air scrubbers, cleaned the attic envelope, and treated the ducts and living spaces. Smoke readings cleared in all rooms and the HVAC system was salvaged instead of replaced.

Problems we solve

Problems We Solve for SOLANA BEACH Renters

Fire damage in a rental is never just one problem. It is soot, water, odor, paperwork, and a landlord who wants the unit back online. We handle the physical work and the documentation that goes with it.

Ask a pro →
01

Smoke odor that returns after cleaning

We treat odor at the source with thermal fogging, ozone, or hydroxyl generators, and we do not close the job until the unit passes an odor check. Porous materials like insulation and drywall paper get replaced when treatment will not reach the source.

↗
02

Water damage from firefighting hoses

We extract standing water, set air movers and dehumidifiers, and take daily moisture readings until structural cavities are dry. Drying typically runs 3 to 5 days, and we document the readings for the adjuster.

↗
03

Landlord and insurer pointing at each other

Our written scope separates tenant contents from structural damage and photographs both. That gives each insurer a clear picture of what belongs to which claim, which is the fastest way to unstick a stalled file.

↗
04

Unit red-tagged and contents inaccessible

We meet you on site when access is allowed and document contents before anything is moved or discarded. Our photo record supports the contents portion of your renters insurance claim.

↗
Proof you can check

Licensed, Certified, and Documented

✓
IICRC Certified FirmInstitute of Inspection, Cleaning and Restoration Certification
✓
IICRC WRT (Water Restoration Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC FSRT (Fire and Smoke Restoration Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
EPA Lead-Safe CertifiedU.S. Environmental Protection Agency
✓
California Contractors State License Board (CSLB) LicenseState of California
Good questions

Frequently Asked Questions

(833) 929-6186 →

Most single-unit tenant fire cleanups in SOLANA BEACH run $1,200 to $6,500 in 2026, depending on square footage, soot spread, and whether water extraction is needed. Small kitchen fires with contained smoke often land near the low end. Fires that spread into attic or wall cavities push toward the high end. We provide a written scope before work begins so you and the landlord know the number.

We do. We are a local fire and smoke restoration crew serving SOLANA BEACH and the surrounding San Diego County neighborhoods, including 92075 and 92014. We work directly with renters, landlords, and property managers, and we document the job so it can be submitted to renters insurance or the property owner's policy without a second inspection.

Renters insurance in California typically covers your personal contents and loss of use, while the landlord's policy covers the structure. Cleanup of the unit itself usually falls to the owner's policy, but your contents and any damage you caused may be handled by your renters policy. We document both sides separately so each claim goes to the right place.

Most tenant fire cleanups take 2 to 7 days from start to final walkthrough. A contained kitchen fire with light soot often finishes in 2 to 3 days. Jobs that involve water extraction and structural drying add 3 to 5 days of drying time before odor treatment and final cleaning. We give you a day-by-day schedule after the initial assessment.

Ready when you are

Need Tenant Fire Damage Cleanup SOLANA BEACH CA Now?

We answer calls 24/7 and can be on site to document damage before anything is moved. Licensed, insured, and IICRC Certified Firm. Call (833) 929-6186 and we will walk you through the next step.

Call for Cleanup (833) 929-6186 →
Request an appointment

Call Our SOLANA BEACH Fire Damage Crew

Fire losses do not keep business hours, and neither does our phone line. Call (833) 929-6186 any time, day or night, and describe what happened. We will ask about the rooms involved and the state of the roof and utilities, then dispatch a crew with board-up materials and extraction gear. Most emergency calls in Solana Beach get a tech on site the same day.

Request received — our team will be in touch shortly.
Tap to call(833) 929-6186