Smoke odor that comes back after cleaning
We treat the source with thermal fogging, hydroxyl generators and ozone on vacant rooms, and we clean the ductwork where residue collects. We do not close the job until the odor is gone on a walkthrough.
Fire Damage Clean Up SOLANA BEACH CA starts the moment you call. We pull soot off framing, neutralize smoke odor and get your home or business back to livable before corrosion and mold set in. Whether it was a kitchen flare-up, an attic electrical fire or a garage blaze, our fire cleanup SOLANA BEACH crew works 24/7 across San Diego County and knows what coastal humidity does to a burned structure.

Fire Damage Clean Up SOLANA BEACH CA is the controlled removal of soot, char, smoke residue and firefighting water from a structure after the flames are out. It is not a shop-vac job. Soot is acidic and etches metal, glass and finished wood within hours, and the water left behind by hoses soaks into drywall, insulation and lumber. We map the burn with a thermal imaging camera, test surfaces with a moisture meter, then work room by room with soot sponges, HEPA air scrubbers and dry ice blasting to strip residue without gouging the substrate.
Most calls we take in Solana Beach come from three places: kitchen fires that spread into cabinets, attic and electrical fires that smolder in old wiring, and smoke that travels through HVAC ducts into rooms that never saw flame. Coastal humidity here holds odor in drywall and fabric longer than inland air does, so a fast start matters. If you are searching for fire damage clean up near me in SOLANA BEACH CA at 2 a.m., our line is live and a crew is dispatched.
Our standard fire damage clean up in SOLANA BEACH covers the structure, the air and the documentation. Here is what is in the scope, and what we quote separately once we have seen the job.
We close broken windows, board doors and tarp roof openings so weather and animals stay out. This happens on the first visit, before any cleaning starts, because an open structure in coastal weather gets worse overnight.
Firefighting water comes out with extractors, and we set air movers and Dri-Eaz dehumidifiers to dry the framing. We monitor with a moisture meter daily and follow ANSI/IICRC S500 until the structure reads dry.
Dry sponges lift loose soot, chemical sponges handle the smeared residue, and dry ice blasting strips char from framing and brick without gouging. We treat every affected surface, including ceilings and the tops of doors.
Thermal fogging reaches wall cavities, and hydroxyl generators run in occupied spaces while ozone treats vacant rooms. We repeat the treatment until the odor is gone, not just covered up.
Smoke moves through the duct system into rooms that never saw flame. We clean the ducts and run HEPA air scrubbers so the air in your Solana Beach home is clear when we finish.
Photos, moisture readings, a room-by-room scope and a contents inventory go into one package for your adjuster. This is included on every job, not an add-on, because the claim is part of the cleanup.
You call (833) 929-6186 and describe the fire, the rooms affected and whether the power is off. We ask a few safety questions, tell you what not to touch, and dispatch a crew. Same-day fire damage clean up in SOLANA BEACH California is standard for us, and overnight calls get the same response.
Before anyone works, we check for compromised framing, melted wiring and gas leaks, and we board or tarp any opening. A thermal imaging camera and moisture meter tell us how far the heat and water traveled. This walk-through takes 30 to 60 minutes and sets the scope.
Firefighting water comes out first. We extract standing water, pull wet insulation and pad, and set air movers and dehumidifiers to dry the framing. Drying a typical room runs two to four days, and we check readings daily until the moisture meter matches a dry reference.
We dry-sponge loose soot, then use chemical sponges and dry ice blasting on framing, brick and heavy char. HEPA air scrubbers run the whole time to capture airborne particles. Ductwork gets cleaned separately because smoke travels through the HVAC system into rooms that never burned.
Thermal fogging reaches cavities a sponge cannot, and hydroxyl generators run while we finish. We walk the job with you, show before-and-after photos, and hand over the documentation package for your insurance claim. Nothing gets closed out until you sign off on the smell test.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Finds hot spots, hidden char and moisture inside wall cavities before we open anything up.
Captures airborne soot and smoke particles while we work so they do not settle back on clean surfaces.
Strips char and soot off framing, brick and delicate surfaces without the gouging that sanding or wire brushes cause.
Pushes a deodorizing agent into wall cavities and voids where a sponge cannot reach.
Neutralizes smoke odor in occupied spaces over a longer run time, safe to operate while people are present.
Pull moisture out of framing and drywall after firefighting water, monitored daily with a moisture meter.
Lift loose and smeared soot off walls, ceilings and finished wood without spreading the residue.
A grease fire scorched the cabinets, hood and ceiling and sent smoke through the living room. The fire department left standing water on the floor and soot on every surface above the counter.
We extracted the water, degreased the cabinets, sponged the soot off the ceiling and fogged the living space. The kitchen was usable in four days and the moisture meter read dry on day three.
Old wiring smoldered in the attic insulation for hours. The framing was charred, the insulation was burned, and smoke had been pulled into every room through the HVAC system.
We opened the attic, removed the burned insulation, blasted the char off the framing and cleaned the ducts. The attic read dry in four days and the house passed the odor walkthrough on the first try.
A bedroom fire in a rental unit left smoke residue on the walls, ceiling and closet, and the shared hallway smelled of smoke. The tenant and the landlord both needed documentation.
We cleaned the unit and the common hallway, treated the soft goods and documented both sides for the claim. The neighboring units stayed occupied, and the unit was re-rentable in nine days.
Most of the damage after a fire is not from the flame. It is from what happens in the hours and days that follow. These are the problems we get called for most often.
Ask a pro →We treat the source with thermal fogging, hydroxyl generators and ozone on vacant rooms, and we clean the ductwork where residue collects. We do not close the job until the odor is gone on a walkthrough.
We dry-sponge and chemically clean surfaces early, then neutralize the residue. Dry ice blasting removes char from framing without the gouging that sanding causes.
We extract standing water, pull wet insulation and pad, and dry the structure with air movers and dehumidifiers. Daily moisture meter readings confirm the cavity is dry before we close it up.
We assess structural damage and electrical hazards first, make the scene safe, and coordinate the repairs. Structural repair after fire is scoped with the cleanup so you are not managing two contractors.
Most residential fire cleanups in Solana Beach run $1,200 to $8,500 in 2026, with a small kitchen or single-room fire near the low end and a multi-room fire with structural char and duct cleaning near the high end. Square footage, soot depth, water damage from hoses and whether contents need packing out all move the number. We give you a written scope before work starts, and insurance usually covers most of it.
We do, and we are local to the 92075 and 92014 ZIP codes. Call (833) 929-6186 and we dispatch a crew to your address in Solana Beach, Del Mar Shores, Lomas Santa Fe or anywhere in San Diego County. We handle residential and commercial fire cleanup, and we can be on site the same day you call.
A single-room fire with light soot usually takes two to four days, including drying time. A whole-house fire with structural char, duct cleaning and contents pack-out runs one to three weeks. Coastal humidity in Solana Beach can add a day to the drying phase, so we check moisture readings daily and do not pull equipment until the framing is dry to standard.
You can handle a small, contained stovetop scorch with a soot sponge and dish soap, but anything beyond that is a bad idea. Soot is acidic and carcinogenic, firefighting water hides inside wall cavities, and a fire can compromise framing and wiring in ways you cannot see. DIY cleanup also risks voiding your insurance claim. Call us and let the documentation start on day one.
Soot keeps working while you wait, and every hour makes the cleanup harder. Call (833) 929-6186 and a licensed, insured crew is dispatched to your Solana Beach address. We answer 24/7, we document everything for your insurance claim, and we do not leave until the smoke smell is gone.
Call Now (833) 929-6186 →Fire losses do not keep business hours, and neither does our phone line. Call (833) 929-6186 any time, day or night, and describe what happened. We will ask about the rooms involved and the state of the roof and utilities, then dispatch a crew with board-up materials and extraction gear. Most emergency calls in Solana Beach get a tech on site the same day.