Soot, odor, and residue gone - cleaned, sealed, and verified

Smoke Damage Restoration SOLANA BEACH CA You Can Trust

Smoke Damage Restoration SOLANA BEACH CA starts the moment we pull up: we stop the spread, pull soot off every surface, and clear the air. Our smoke cleanup in SOLANA BEACH handles everything from a kitchen flare-up to attic smoke that soaked into insulation. We work San Diego County homes and businesses 24/7, so call and we roll.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Quality Smoke Damage Restoration in SOLANA BEACH
Careful work. Honest options.
About this service

What Smoke Damage Restoration SOLANA BEACH CA Involves

Smoke Damage Restoration SOLANA BEACH CA is the process of removing soot residue, neutralizing smoke odor, and sealing the surfaces smoke has penetrated so a structure is safe and livable again. It is not a wipe-down. Smoke travels through wall cavities, attic insulation, and HVAC ducts, and the acidic residue keeps etching metal and finishes for weeks. We test with a moisture meter and thermal imaging camera, then match the method to the material - soot sponges on painted drywall, dry ice blasting on charred framing, HEPA air scrubbers running the whole time.

In Solana Beach, most calls come from kitchen fires, electrical shorts in older panel boxes, and attic smoke that rides the coastal air into every room. Salt air and marine humidity make it worse: smoke odor binds to damp surfaces and lingers long after the visible soot is gone. That is why we treat smoke remediation SOLANA BEACH CA as an air-and-structure job, not a surface job. If you are searching for smoke damage restoration near me in SOLANA BEACH CA, we answer 24/7 and give you a straight answer on scope before we start.

  • ✓ Odor Gone, Not Masked
  • ✓ Contents Saved, Not Tossed
  • ✓ Insurance Paperwork Handled
  • ✓ Same-Day Emergency Response
What's included

What Smoke Damage Restoration SOLANA BEACH CA Includes

Every job is different, but most smoke damage restoration projects include the same core steps. Here is what is covered in a standard scope, and what we treat as an add-on only when the damage calls for it.

✓

Full Smoke & Soot Assessment

We walk the structure with a thermal imaging camera and moisture meter to find where smoke traveled, including wall cavities, attic spaces, and HVAC ducts. You get a written scope with photos before any work begins.

✓

Containment & Air Scrubbing

Plastic containment and negative air pressure keep soot from spreading to clean rooms. HEPA air scrubbers and hydroxyl generators run throughout the job to capture particles and break down odor molecules in the air.

✓

Surface Cleaning & Residue Removal

Soot sponges, dry ice blasting, and soda blasting remove residue from drywall, framing, cabinets, and hard surfaces. We follow ANSI/IICRC S520 standards and treat every affected surface, from ceilings to baseboards.

✓

Odor Neutralization & Sealing

Thermal fogging and ozone treatment reach cavities and ducts that hand cleaning cannot. We then apply a smoke sealant to framing and drywall to lock in any remaining odor so it does not return on humid days.

✓

Contents Cleaning & Pack-Out

Furniture, clothing, and documents are cleaned on-site or packed out to our facility. We save 70 to 85 percent of contents on a typical job using methods matched to each material, from dry ice blasting to specialized washing.

✓

Final Verification & Documentation

We re-test moisture, do a final odor check, and walk every room with you. You get before-and-after photos and a written summary for your insurance file. If anything is not right, we fix it before we leave.

How it works

How Our Smoke Cleanup Process Works

01

Emergency Call & Assessment

You call, we ask the right questions, and a crew heads your way. On arrival we walk the structure with a thermal imaging camera and moisture meter to map where smoke has traveled. We give you a written scope and price before any work starts - no surprises.

02

Containment & Air Control

We set up plastic containment and negative air pressure so soot does not spread to clean rooms. HEPA air scrubbers and hydroxyl generators start running immediately. This step typically takes 1 to 2 hours and protects the rest of your home while we work.

03

Soot & Residue Removal

Technicians use soot sponges, dry ice blasting, and soda blasting to remove residue from drywall, framing, and hard surfaces. We follow ANSI/IICRC S520 standards for smoke and fire residue. Most residential jobs take 2 to 4 days for this phase.

04

Odor Neutralization & Sealing

Thermal fogging and ozone treatment reach cavities and ducts that hand cleaning cannot. We then apply a smoke sealant to framing and drywall to lock in any remaining odor. This phase runs 1 to 2 days, with the equipment running overnight.

05

Verification & Walk-Through

We re-test moisture, do a final odor check, and walk every room with you. You get photos before and after, plus a written summary for your insurance file. If anything is not right, we fix it before we pack up the equipment.

Tools & methods

Tools and Methods We Use

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Thermal Fogger

Vaporizes a deodorizing agent that penetrates wall cavities, ducts, and furniture where smoke odor hides. It reaches spaces that hand cleaning cannot.

Ozone Generator

Breaks down odor molecules at the source in unoccupied spaces. We use it overnight and re-test the air before the homeowner returns.

HEPA Air Scrubber

Captures soot particles and airborne contaminants down to 0.3 microns. We run scrubbers throughout the job to protect clean rooms from cross-contamination.

Hydroxyl Generator

Neutralizes odor safely in occupied spaces. It is the go-to for jobs where the family needs to stay in part of the home while we work.

Thermal Imaging Camera

Finds hidden smoke trails and hot spots behind walls and in attics. It tells us where to clean before we open anything up.

Dry Ice Blaster

Removes soot and char from framing and delicate surfaces without water or chemicals. It is ideal for wood, brick, and items that cannot get wet.

Soda Blaster

A gentler option for soft materials and intricate surfaces. It strips residue without damaging the substrate underneath.

Real results

Before and after.

Kitchen Fire in Solana Beach Town Center

Before

A grease fire left soot on every cabinet, the ceiling, and the range hood. The smell had spread to the living room and bedrooms, and the owner was worried the cabinets would need replacing.

After

We cleaned the cabinets with soot sponges and dry ice blasting, degreased the range hood and ductwork, and ran hydroxyl generators for two days. The cabinets were saved, and the final odor check passed in four days.

Attic Fire in Lomas Santa Fe

Before

An electrical fire in the attic sent smoke through the roof framing and into the second-floor bedrooms. The insulation was contaminated, and the smell was strong in every upstairs room.

After

We removed and replaced the insulation, cleaned the rafters with dry ice blasting, and sealed the framing. The bedrooms were cleaned and deodorized, and the final walk-through passed in seven days.

Bedroom Fire in Del Mar Shores

Before

A bedroom fire left smoke residue on the walls, ceiling, and closet contents. The mattress and bedding were heavily soiled, and the tenant was worried about losing everything.

After

We packed out the soft goods for specialized cleaning, treated the walls and ceiling, and ran ozone overnight. The mattress and bedding were saved, and the tenant moved back in after six days.

Problems we solve

Smoke Damage Cleanup SOLANA BEACH Problems We Solve

Smoke damage is not just a smell. It is an acidic residue that keeps working on your home until it is removed and neutralized. These are the problems we hear about most from Solana Beach customers, and how we fix them.

Ask a pro →
01

Smoke odor that returns on humid days

We use thermal fogging and hydroxyl generators to reach cavities and ducts, then apply a smoke sealant to framing and drywall. That locks the odor source in so it does not come back when the marine layer rolls in.

↗
02

Soot residue on walls and ceilings that smears when wiped

Our technicians use dry soot sponges and HEPA vacuums to lift residue without smearing. For tough surfaces we use dry ice blasting, which removes soot without water or chemicals. We follow ANSI/IICRC S520 standards on every job.

↗
03

Smoke traveled into the attic and HVAC system

We map smoke travel with a thermal imaging camera, then clean or replace contaminated insulation and clean the ductwork. HEPA air scrubbers run throughout to capture particles. This is the step most crews skip, and it is why their jobs fail.

↗
04

Insurance claim stalled on documentation

We document every affected room with photos and moisture logs and provide a line-item scope that matches what adjusters expect. We also speak directly with your adjuster, which takes the paperwork burden off you.

↗
Proof you can check

Licensed, Certified, and Documented

✓
IICRC Certified FirmInstitute of Inspection, Cleaning and Restoration Certification
✓
IICRC WRT (Water Restoration Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC FSRT (Fire and Smoke Restoration Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
California Contractors State License Board (CSLB) LicensedCalifornia Contractors State License Board
✓
EPA Lead-Safe CertifiedU.S. Environmental Protection Agency
Good questions

Frequently Asked Questions

(833) 929-6186 →

Most residential smoke damage restoration jobs in Solana Beach run $1,200 to $6,500 in 2026, depending on square footage and how far smoke traveled. A single-room kitchen fire might land near $1,500, while a whole-house job with attic and duct cleaning can reach $8,000 or more. We give you a written price before work starts, and we work with your insurance carrier to keep out-of-pocket costs down.

We do. Fire Damage Restoration Solana Beach is a local crew serving Solana Beach and San Diego County with 24/7 emergency smoke cleanup. Call (833) 929-6186 and we will dispatch a team to your address, usually within 60 to 90 minutes. We handle everything from a single room to a full commercial building, and we work directly with your insurance company.

Yes, in many cases. If the drywall is structurally sound and the smoke residue is on the surface, we can clean it with soot sponges and seal it with a smoke sealant. Replacement is only necessary when drywall is charred, crumbling, or saturated with water from firefighting. We assess with a moisture meter and thermal camera and tell you honestly which path is cheaper and safer.

Most residential smoke remediation jobs take 3 to 7 days from start to final walk-through. A small kitchen fire might wrap in 3 days; a whole-house job with attic and HVAC cleaning can run 7 to 10. The timeline depends on square footage, how far smoke traveled, and whether water damage from firefighting is involved. We give you a day-by-day schedule before we start.

Ready when you are

Get Smoke Damage Restoration SOLANA BEACH CA Started Now

Smoke residue gets harder to remove every day. Call (833) 929-6186 and a live person will dispatch a crew to your Solana Beach address, usually within 60 to 90 minutes. We give you a written price before we start and work directly with your insurance carrier.

Call Now (833) 929-6186 →
Request an appointment

Call Our SOLANA BEACH Fire Damage Crew

Fire losses do not keep business hours, and neither does our phone line. Call (833) 929-6186 any time, day or night, and describe what happened. We will ask about the rooms involved and the state of the roof and utilities, then dispatch a crew with board-up materials and extraction gear. Most emergency calls in Solana Beach get a tech on site the same day.

Request received — our team will be in touch shortly.
Tap to call(833) 929-6186