Soot, odor and residue removed by a licensed crew

Smoke Remediation SOLANA BEACH CA That Clears the Air

Smoke Remediation SOLANA BEACH CA starts with a full inspection and ends with clean air and a residue-free structure. We handle residential and commercial losses from kitchen fires, attic fires and electrical shorts, using HEPA air scrubbers, thermal foggers and ozone generators to pull soot out of drywall, insulation and lumber. If you need smoke damage remediation in SOLANA BEACH, call (833) 929-6186 and we roll a crew to your door.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Smoke Remediation
Careful work. Honest options.
About this service

What Smoke Remediation SOLANA BEACH CA Actually Involves

Smoke Remediation SOLANA BEACH CA is the process of removing soot residue, smoke odor and airborne particulates from a structure after a fire, and it is needed whenever smoke has traveled beyond the room of origin. Smoke pushes into wall cavities, attic insulation, HVAC ducts and the backs of cabinets, leaving acidic soot that etches metal, stains drywall and keeps off-gassing for months. Our crew uses thermal imaging cameras and moisture meters to map where the smoke went, then HEPA air scrubbers, soot sponges and dry ice blasting to pull it out without smearing it deeper into porous materials.

In Solana Beach, the call usually comes after a kitchen fire in a Lomas Santa Fe condo or an electrical fire in an older Del Mar Shores home where the wiring predates current code. Coastal humidity off the bluffs makes it worse: soot bonds to damp drywall and the odor sets into lumber and insulation faster than it would inland. That is why we treat smoke damage remediation SOLANA BEACH as a same-day priority. If you are searching for smoke remediation near me in SOLANA BEACH CA at 2 a.m., our line is open and a crew can be dispatched.

  • ✓ Stop the Odor at the Source
  • ✓ Protect Structure and Contents
  • ✓ Documentation for Your Claim
  • ✓ Back to Normal Faster
What's included

What Our Smoke Remediation Service Includes

Every smoke remediation job we run includes inspection, containment, soot removal, deodorization and a final air test, plus the documentation your insurer needs. Structural repairs, pack-out storage and contents cleaning are scoped separately when the loss calls for them, and we tell you which is which before we start.

✓

Full Inspection and Written Scope

Thermal imaging and moisture mapping of the smoke path, room by room, with a written scope and price range before equipment runs. You keep a copy for your insurer.

✓

Containment and Air Scrubbing

6-mil poly containment, negative air pressure and HEPA air scrubbers staged to stop cross-contamination while the crew works. Equipment runs for the duration of the job.

✓

Soot and Residue Removal

Soot sponging on drywall and framing, dry ice blasting on charred lumber, soda blasting where paint must come off. Saturated insulation is removed and bagged, not left in the cavity.

✓

Deodorization and Sealing

Thermal fogging, hydroxyl generation and ozone treatment as the space allows, plus smoke sealant on framing and cavities so odor cannot off-gas through new paint.

✓

Final Air Test and Report

Post-job moisture and air quality verification with a written report and photos. We walk the job with you and handle the adjuster call if the scope needs revision.

How it works

How Our Smoke Remediation Process Works

01

Emergency Inspection

We arrive, walk the structure with a thermal imaging camera and moisture meter, and map the smoke path through wall cavities, attic and HVAC. You get a written scope and a price range before we set a single air mover. Typical inspection takes 45 to 90 minutes.

02

Containment and Air Control

We seal doorways and returns with 6-mil poly and negative air pressure, then stage HEPA air scrubbers to stop cross-contamination. This keeps soot from spreading into clean rooms while we work, and it is the step most DIY attempts skip, which is why odor comes back.

03

Soot and Residue Removal

Crews use soot sponges on drywall and framing, dry ice blasting on charred lumber, and soda blasting where paint needs to come off clean. We pull saturated insulation and bag it, then treat the cavity with a smoke sealant so the odor cannot off-gas through new paint.

04

Deodorization

Thermal foggers push odor counteractant into the same cracks the smoke entered. Hydroxyl generators run in occupied spaces, ozone generators run in sealed unoccupied spaces. We cycle equipment for 24 to 72 hours depending on square footage and how long the smoke sat.

05

Verification and Handoff

We re-test with a moisture meter and air quality readings, walk the job with you room by room, and hand over a written report with photos. If your insurer needs a scope revision, we handle the adjuster call. You get the final documentation the same day we pull equipment.

Tools & methods

Equipment and Methods We Use

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Thermal Imaging Camera

Maps the smoke path through wall cavities and attic spaces and finds hidden moisture from firefighting water before it becomes mold.

HEPA Air Scrubber

Filters airborne soot and particulates down to 0.3 microns and keeps clean rooms clean while the crew works in containment.

Thermal Fogger

Pushes odor counteractant into the same cracks and cavities the smoke entered, which is where sprays cannot reach.

Hydroxyl Generator

Deodorizes occupied spaces safely over 24 to 72 hours, which lets homeowners stay in unaffected rooms during the job.

Ozone Generator

Treats sealed, unoccupied spaces where odor has soaked deep into framing and insulation. We cycle it and air the space before you return.

Dry Ice Blaster

Removes char and residue from framing and masonry without abrasion or water, so the surface is clean and ready to seal.

Dri-Eaz and Phoenix Equipment

Air movers and dehumidifiers from Dri-Eaz and Phoenix Restoration Equipment dry firefighting water fast, which stops mold before it starts.

Real results

Before and after.

Kitchen Fire Smoke in a Lomas Santa Fe Condo

Before

A grease fire sent smoke through the kitchen, living room and shared wall into the neighboring unit. Soot coated the cabinets, the microwave and the ceiling, and the smell was strong in both units.

After

We contained both units, degreased every hard surface, removed saturated insulation from the shared cavity and ran HEPA scrubbers for three days. Both units passed air testing on day four.

Attic Fire Residue in a Del Mar Shores Home

Before

A roof fire left charred framing and smoke-soaked blown-in insulation in the attic. The smell was noticeable in the upstairs bedrooms and the HVAC was pulling residue into the house.

After

We removed the saturated insulation, dry ice blasted the framing, sealed the cavities and cleaned the ductwork. Air testing cleared in seven working days and the upstairs odor was gone.

Electrical Fire Cleanup in a Town Center Restaurant

Before

A panel fire left acrid residue on the dining room surfaces and smoke in the back-of-house wall cavities. The restaurant was closed and losing revenue every day.

After

We worked overnight, cleaned and deodorized the dining room, blasted and sealed the back-of-house cavities and documented the loss for the commercial policy. The restaurant reopened the next morning.

Problems we solve

Smoke Problems We Solve in Solana Beach

Smoke damage is not one problem, it is four: residue, odor, hidden migration and the paperwork that follows. Here is how we handle each one so you are not chasing the smell six months later.

Ask a pro →
01

Smoke odor that returns after cleaning

We locate the source with thermal imaging, remove saturated porous material, seal the cavity with a smoke sealant and run hydroxyl or ozone equipment until air testing clears. The odor does not come back because the source is gone, not covered.

↗
02

Soot residue etching metal and glass

Our crew neutralizes soot with dry sponges and dry ice blasting before it sets, then cleans and protects hard surfaces. We photograph every surface before and after so the condition is documented for your claim.

↗
03

Smoke migration into attic and HVAC

We map the full path with a thermal imaging camera, then clean ducts, remove saturated attic insulation and treat each affected cavity. The scope covers every room the smoke reached, not just the one that burned.

↗
04

Insurance scope disputes

We document daily with photos, moisture readings and a written scope in the format adjusters expect, and we talk to your adjuster directly. If the scope needs a revision, we handle it before the claim closes.

↗
Proof you can check

Licensed, Certified and Documented

✓
IICRC Certified FirmInstitute of Inspection, Cleaning and Restoration Certification
✓
IICRC WRT (Water Damage Restoration)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC FSRT (Fire and Smoke Restoration)Institute of Inspection, Cleaning and Restoration Certification
✓
EPA Lead-Safe CertifiedU.S. Environmental Protection Agency
✓
CSLB Licensed ContractorCalifornia Contractors State License Board
Good questions

Smoke Remediation Questions We Hear Every Week

(833) 929-6186 →

Most residential smoke remediation jobs in Solana Beach run $1,800 to $6,500 in 2026, with whole-house losses and commercial work going higher. The range depends on square footage, how many rooms the smoke reached, whether insulation and drywall have to come out, and how long the residue sat before the call. We give a written range after the inspection, before equipment runs.

We do. Fire Damage Restoration Solana Beach is a local crew serving 92075 and 92014, and we handle both residential and commercial smoke damage remediation. Call (833) 929-6186 and we will confirm a window, usually same day for emergencies. We are licensed, insured and IICRC certified, and we can send documentation to your insurer.

A typical single-room smoke loss takes 3 to 5 working days from inspection to final air test. Whole-house jobs with attic involvement run 7 to 10 working days, mostly because deodorization equipment needs 24 to 72 hours of run time and drywall repairs have to cure. We give you a day-by-day schedule at the walkthrough.

Yes, most homeowners and commercial property policies in California cover smoke remediation as part of a fire claim, including cleaning, deodorization and often contents. We document the loss with photos, moisture readings and a written scope, and we will talk to your adjuster directly. Call us before you throw anything away, because disposal can complicate the claim.

Ready when you are

Get Smoke Remediation SOLANA BEACH CA Started Today

Smoke residue gets harder to remove every hour it sits. Call (833) 929-6186 and we will schedule an inspection, give you a written range and start containment the same day. Licensed, insured and IICRC certified, serving 92075 and 92014.

Call for Inspection (833) 929-6186 →
Request an appointment

Call Our SOLANA BEACH Fire Damage Crew

Fire losses do not keep business hours, and neither does our phone line. Call (833) 929-6186 any time, day or night, and describe what happened. We will ask about the rooms involved and the state of the roof and utilities, then dispatch a crew with board-up materials and extraction gear. Most emergency calls in Solana Beach get a tech on site the same day.

Request received — our team will be in touch shortly.
Tap to call(833) 929-6186