Soot, smoke, and water damage handled in one coordinated pass

Apartment Fire Cleanup SOLANA BEACH CA

Apartment Fire Cleanup SOLANA BEACH CA starts with a 60-minute on-site assessment, not a phone quote. We handle multi-unit soot removal, smoke odor neutralization, and the water damage left behind by firefighting lines. If you own or manage a condo near the coast, call (833) 929-6186 and we will walk the unit with you before anything gets moved.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Fire Damage Restoration Solana Beach — Fire Damage Restoration you can rely on
Careful work. Honest options.
About this service

What Apartment Fire Cleanup SOLANA BEACH CA Involves

Apartment Fire Cleanup SOLANA BEACH CA is the trade work that follows a residential fire: removing soot residue from every surface, pulling wet drywall and insulation, neutralizing smoke odor at the molecular level, and documenting what can be saved versus what has to go. In a multi-unit building the job doubles, because smoke travels through shared attic chases, hallway returns, and plumbing penetrations into units that never saw flame. We map that spread with a thermal imaging camera before we write a single line of scope.

Most calls we take in San Diego County come from renters and owners dealing with kitchen grease fires, electrical fires behind older walls, and balcony or garage fires that push smoke through a whole building. If you are searching for apartment fire cleanup near me in SOLANA BEACH CA at 2 a.m., the priority is stopping secondary damage: wet framing, mold growth after fire, and soot etching the finishes in neighboring units. We board, dry, and deodorize first, then rebuild.

  • ✓ Stop Soot Etching
  • ✓ Contain Smoke Migration
  • ✓ Dry the Firefighting Water
  • ✓ Document for the Claim
What's included

What Apartment Fire Cleanup Includes

The standard scope covers board-up, soot removal, water extraction and drying, odor treatment, and debris hauling for the affected unit. Structural rebuild, content pack-out, and HVAC duct cleaning are quoted separately once the assessment shows how far smoke traveled. You get the full scope in writing before work starts.

✓

Emergency Board-Up and Securing

Plywood, fire retardant coatings, and tarp-over for roof fire damage. We secure the unit and common entries the same visit so the building is not open overnight.

✓

Soot and Residue Removal

Dry-sponge and HEPA-vacuum sequence on ceilings, walls, and framing, followed by wet cleaning of hard surfaces. Contents get sorted into cleanable, restorable, and unsalvageable.

✓

Water Extraction and Drying

Standing water from hose lines and sprinklers gets extracted, then Dri-Eaz air movers and dehumidifiers run until wall cavities read dry on a moisture meter, usually three to five days.

✓

Smoke Odor Neutralization

Hydroxyl generators, ozone treatment in unoccupied spaces, and thermal fogger application into cavities and ductwork with odor counteractant. Treatment runs 24 to 48 hours with a re-check walkthrough.

✓

Debris Removal and Hauling

Charred framing, melted wiring, ruined drywall, and unsalvageable contents get hauled out and documented by photo and weight for the claim file.

How it works

How Our Cleanup Process Runs

01

Emergency Board-Up

We secure burned openings with plywood and fire retardant coatings, tarp roof fire damage, and shut off affected utilities. Typical response is 60 to 90 minutes to Solana Beach addresses, day or night. You get a written board-up record for your insurer.

02

Assessment and Scope

A thermal imaging camera and moisture meter map where heat, smoke, and water traveled. We mark affected drywall, insulation, and lumber, then hand you a room-by-room scope with quantities. This is the document your adjuster works from.

03

Soot and Debris Removal

Crews dry-sponge soot sponges across ceilings and walls, HEPA-vacuum cavities, and remove charred framing and melted wiring. Contents get sorted into cleanable, restorable, and unsalvageable piles. Most one-bedroom units clear in two to three days.

04

Odor and Air Treatment

We run hydroxyl generators and ozone generators in unoccupied spaces, then thermal fogger treatment into wall cavities and ductwork with odor counteractant. Treatment runs 24 to 48 hours, and we re-sniff the unit with you before signing off.

05

Rebuild and Final Walk

Drywall, insulation, lumber, and paint go back to code, sealed with smoke sealant on framing. We schedule a final walkthrough with a moisture reading and photo set, so you can hand the unit back to a tenant or relist it with confidence.

Tools & methods

Equipment and Standards We Work To

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Thermal Imaging Camera

Finds where heat and smoke traveled behind walls and above ceilings, so the scope covers hidden damage instead of just what is visible.

HEPA Air Scrubber

Creates negative air pressure and filters fine particulates, keeping soot and smoke from migrating into neighboring units during demolition.

Hydroxyl Generator

Neutralizes smoke odor in occupied-adjacent spaces over 24 to 48 hours without the restrictions that come with ozone treatment.

Thermal Fogger

Pushes odor counteractant into wall cavities, framing, and ductwork where sponges and sprays cannot reach.

Dri-Eaz Air Movers and Dehumidifiers

Dries firefighting water out of drywall, lumber, and insulation to a metered dry standard, typically in three to five days.

Moisture Meter

Reads moisture content in framing and drywall daily, giving the claim file a documented drying curve instead of a verbal assurance.

Dry Ice Blaster

Cleans char and soot from framing and masonry without abrasion, which preserves lumber that would otherwise be removed and replaced.

Real results

Before and after.

Kitchen Fire, Town Center Condo

Before

A grease fire scorched the range hood and cabinets and left a sticky soot film across the kitchen, living room, and hallway ceiling. Smoke odor had settled into the closets, and the sprinkler head had wet roughly 120 square feet of drywall.

After

Cabinets and hood were degreased and sealed, ceilings dry-sponged and repainted, and 120 square feet of drywall replaced after drying. Air quality cleared on day three, and the unit passed an odor walkthrough with the owner present.

Electrical Fire, Eden Gardens Fourplex

Before

A fire behind a bedroom wall sent smoke into all four units. Two units had visible soot, and the other two had odor only. The building's shared attic chase carried smoke above the ceiling line across the whole structure.

After

All four units were treated, with 2,400 square feet of attic insulation removed and replaced. Soot was removed from two units, and odor treatment ran 48 hours. All four units passed air quality checks within nine days.

Balcony Fire, Coastal Bluffs Building

Before

A balcony grill fire spread to the exterior wall and triggered sprinklers that released roughly 30 gallons per minute for several minutes. Two units took water, and soot stained the exterior stucco and window frames.

After

Water was extracted and both units dried in four days with metered readings. Stucco and frames were cleaned and sealed, and no mold growth after fire was found at final inspection. Both units were reoccupied in eleven days.

Problems we solve

Problems We Solve After a Unit Fire

Most of the damage we see in Solana Beach is not from the flame itself. It is smoke, water, and delay. Here is what we fix and why it matters.

Ask a pro →
01

Smoke odor returning weeks after cleaning

We thermal-fog cavities and ductwork with odor counteractant and run hydroxyl generators until air quality tests clear. If insulation is saturated, it comes out and gets replaced rather than treated.

↗
02

Mold growth after firefighting water

Extraction starts on the first visit, followed by daily moisture readings and drying equipment sized to the wet area. Work follows ANSI/IICRC S500 and S520 so the dry standard is documented, not guessed.

↗
03

Soot etching glass, chrome, and appliances

Dry-sponge removal happens before any wet cleaning, which is the sequence that lifts residue without smearing it. We treat metal fixtures with a corrosion inhibitor after cleaning.

↗
04

Insurance claim stalled on documentation

We produce photo sets, moisture maps, and quantity scopes per unit, and we bill insurers directly. For HOA fire damage cleanup, we separate common-area from unit damage so each policy pays its share.

↗
Proof you can check

Licensed, Certified, and Documented

✓
IICRC Certified FirmInstitute of Inspection, Cleaning and Restoration Certification
✓
IICRC WRT (Water Restoration Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC FSRT (Fire and Smoke Restoration Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC ASD (Applied Structural Drying)Institute of Inspection, Cleaning and Restoration Certification
✓
EPA Lead-Safe CertifiedU.S. Environmental Protection Agency
Good questions

Frequently Asked Questions

(833) 929-6186 →

Most single-unit cleanups run $3,500 to $12,000 in 2026, and whole-building jobs with smoke spread run $15,000 to $40,000. Cost depends on square footage, how far smoke traveled, whether walls get opened for drying, and how much content is restorable. We give a written range after the on-site assessment, before any work begins.

We do. Fire Damage Restoration Solana Beach handles condo fire damage restoration SOLANA BEACH from board-up through final paint, including shared-wall drying and HOA documentation. Call (833) 929-6186 and we will confirm availability and schedule an assessment, usually the same day.

The property owner's policy usually covers the structure, and a renter's policy covers personal contents and loss of use. In multi-unit losses, the HOA master policy and individual policies split responsibility, and we document each unit separately so both adjusters get what they need. We bill insurers directly and walk you through the split.

A single one-bedroom unit typically takes 3 to 7 days for cleanup and drying, plus 1 to 3 weeks for rebuild. Multi-unit buildings with smoke spread run 2 to 4 weeks before reconstruction. Odor treatment alone needs 24 to 48 hours of equipment run time, and we do not sign off until the unit passes a walkthrough.

Ready when you are

Need Apartment Fire Cleanup SOLANA BEACH CA Tonight?

We answer the phone around the clock and roll a crew to your unit, usually within 60 to 90 minutes. Board-up, water extraction, and soot containment start on the first visit. Call (833) 929-6186 and we will walk the damage with you before anything gets moved.

Call Now (833) 929-6186 →
Request an appointment

Call Our SOLANA BEACH Fire Damage Crew

Fire losses do not keep business hours, and neither does our phone line. Call (833) 929-6186 any time, day or night, and describe what happened. We will ask about the rooms involved and the state of the roof and utilities, then dispatch a crew with board-up materials and extraction gear. Most emergency calls in Solana Beach get a tech on site the same day.

Request received — our team will be in touch shortly.
Tap to call(833) 929-6186